Products Of Vinay Steels

Pipes

Range

15 mm NB up to 1200 mm NB in Schedule 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS

Form

Seamless / ERW / Welded in Round & Square.

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Tubes

Range

6.35 mm OD up to 254 mm OD in 0.6 to 20 mm Thick.

Form

Seamless / ERW / Welded in Round & Square.

Sheets & Plates

Range

Thickness: 1 mm to 200 mm
Width: 1000 mm to 3000 mm
Length: 2500 mm, 5000 mm, 6000 mm, 10000 mm.

Form

Hot Rolled / Cold Rolled.

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

Coils

Range

Thickness: 1 mm to 200 mm
Width: 1000 mm to 3000 mm

Form

Hot Rolled / Cold Rolled.

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

Stripes

Range

Thickness: 0.05 mm to 2.5 mm
Width: 6 mm to 460 mm

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

Buttweld Fittings

Range

15 mm NB upto 1200 mm NB in Schedule 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS

Form

Seamless & Welded Long Radius & Short Radius Elbow 90 deg, Long Radius Elbow 45 deg, Long Radius & Short Radius Elbow 180 deg (Return Bend), Reducing Elbow, Equal Tee, Unequal Tee, Crosses, Concentric Reducer, Eccentric Reducer, Long Stubend, Short Stubend, Collar, Pipe Cap, Long Radius Bends R = 3D, 5D, 6D, 8D, 10D & 20D in 15 deg, 30 deg, 60 deg & 90 deg and Drawing based Butt Weld Fittings (Customized).

Forged Fittings

Range

15 mm NB upto 100 mm NB in 2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS, 150 LBS, 250 LBS.

Form

Socket Weld Fittings: Elbow 90 deg, Elbow 45 deg, Cross, Tee, Coupling, Half Coupling & Cap

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Flanges

Range

15 NB upto 600 NB in 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / Table 2.5 , Table 6 , Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400

Form

Slip On, Socket Weld, Blind, Lapped, Screwed, Weld Neck, Reducing, Spectacle, Slip On Boss, Plate, Plate Blank, Screwed Boss.

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

Olets

Range

15 NB upto 100 NB 3000 LBS & 6000 (Sockolet / Thredolet / Nippolet / Elbolet / Insert Weldolet / Branzolet & Coupolet), 6 NB upto 600 NB (Weldolet / Sweepolet) SCH 5S, 10S, 10,20,40S, STD, 60, 80S, 80, XC, 100, 120, 140, 160 & XXS.

Fasteners

Range & Form

Bolts: Hex Head Bolts, Hexagon Head Screw, Mushroom Head Square Neck Bolts, T- Head Bolts, Wing Screw, Eye Bolt, Lifting Eye Bolt, Countersunk Raised Head Bolts.
Nuts: Hexagon Nuts, Hexagon Coupling Nuts, Hexagon Thin Nut, Square Nut, Hexagon Castle Nuts, Self Locking Nut, Hexagon Domed Cap Nuts.
Washer: Plain Washer, Plain Big OD Washer, Plain Small OD Washer, Spring Lock Washer, Spring Washer Heavy Duty, Tooth Washer, Serrated Star Washer, Tab Washer with One Tab, Tab Washer with Two Tab.

Stainless Steel

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Stainless Steel Bar / Rod & Wire

Range

Material - Forged Bars
Diameter - 0.5 mm to 500 mm
Length - 50 mm to 6000 mm long
Specification - A-479

Grades:

AISI-304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, 202 Etc.
(ASTM)- A-479

Other Special Grade :

Duplex Steel (2507, 2205, 329L), Stainless Steel 17-4 PH (630 Gr.) 15.5 PH, 17.7 PH, 4122 Etc

Finishing :

Peeling-Bright, Polish & Black.

In Form :

Flat Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Block, Ingot, Forging Etc.

Length :

Standard & Cut length.

Hardness for Wire:

Soft, Hard, Half Hard Etc.

Value Added Service :

Machining (CNC), Centerless Grinding (CG).
Heat Treatment, Annealed, Pickled, Polish.
Rolling, Forging, Cutting, Bending, Minor Fabrication Etc.

Test Certificate :

Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.

Specialize :

440C, CG, Forging, Wiremesh etc.